Stereoselective acid-catalyzed homoallylic rearrangement of cyclopropylsilylmethanols: an efficient route to Z-homoallyl derivatives

Treatment of cyclopropylsilylmethanols derived from cyclopropyl silyl ketones with acid catalyst gives the corresponding silyl-substituted homoallyl derivatives in high yields with good stereoselectivity, independent of the substituents on the cyclopropyl ring. Cyclopropylsilylmethanols having a n-, s-butyl or phenyl group on the carbinyl carbon react to afford the E-homoallyl derivatives selectively. On the other hand, the reaction of cyclopropylsilylmethanols having a tert-butyl group gives Z-isomers exclusively. The following protiodesilylation of the resulting homoallyl derivatives proceeds with retention of configuration.     

Quantum control of molecular orientation by two-color laser fields

We demonstrate molecular orientation by using phase-controlled two-color omega+2omega laser pulses with an intensity of 1.0x10(12) W/cm(2) and a pulse duration of 130 fs. The orientation of three iodine-containing molecules (IBr, CH(3)I, and C(3)H(5)I) was monitored by the directional asymmetries of the photofragment angular distribution in dissociative ionization. In all three molecules, the directional asymmetry showed an oscillating behavior dependent on the relative phase difference between omega and 2omega pulses. The phase dependence of the directional asymmetry observed in iodine ions and counterpart ions were out of phase with each other. This result shows that a phase-controlled omega+2omega optical field discriminates between parallel and antiparallel configurations of aligned molecules that have a permanent dipole. This method performed well because (1) molecular orientation can be achieved by all-optical fields; (2) the direction of orientation is easily switched by changing the sign of the quantum interference; and (3) this method is free from any resonance constraint and thus can be applied to any molecule.     

Cyclophosphamides from aminosugars and aminonucleosides

Condensation of bis-(2-chloroethyl)phosphoramidic dichloride with 3′-amino-3′-deoxy-N,N-dimethyladenosine afforded the 2′,3′-cyclicphosphorodiamidate (III). By an improved synthesis, methyl 3-amino-3-deoxy-β-D-ribofuranoside was obtained as a model compound for conversion to the analogous 2,3-cyclicphosphorodiamidate (XII). Existence of the latter as two diastereomers due to phosphorus asymmetry was shown by nmr analysis, using comparison with the 5-(O-p-nitrobenzoate) (XIII) as a basis for assignments.     

Trans-hydrometalation of alkynes by a combination of InCl3 and DIBAL-H: one-pot access to functionalized (Z)-alkenes

[reaction: see text] Triethylborane-induced hydrometalation of alkynes proceeds in an anti manner to afford the corresponding (Z)-alkenylmetal compounds stereoselectively, where dichloroindium hydride would play a key role. A variety of functional groups including hydroxy, carbonyl, and carboxy groups were tolerant under the reaction conditions. Following iodolysis and cross-coupling reaction of the (Z)-alkenylmetal species show the usefulness of this strategy.     

Formation of ice nanotube with hydrophobic guests inside carbon nanotube

A composite ice nanotube inside a carbon nanotube has been explored by molecular-dynamics and grand canonical Monte Carlo simulations. It is made from an octagonal ice nanotube whose hollow space contains hydrophobic guest molecules such as neon, argon, and methane. It is shown that the attractive interaction of the guest molecules stabilizes the ice nanotube. The guest occupancy of the hollow space is calculated by the same method as applied to clathrate hydrates.     

Control of viscoelasticity using redox reaction

The viscoelasticity of a fluid was tuned with the Faradaic reaction of (11-ferrocenylundecyl)trimethylammonium bromide (FTMA), a "redox-switchable" surfactant. An aqueous solution of the reduced form of FTMA exhibited a remarkable viscoelasticity in the presence of sodium salicylate (NaSal) because of the formation of three-dimensional entanglement of wormlike micelles. Electrolytic oxidation of FTMA caused the viscosity of the system to dramatically decrease and the elasticity to disappear. This drastic decrease in viscoelasticity arose from the disruption of wormlike micelles. This novel electrorheological phenomenon is expected to be applicable to ink for inkjet printers, the electrochemically controlled release of substances entrapped in wormlike micelles of FTMA, and fluid flow rate control using electric signals.     

Hydrogen-bonded networks in organic conductors: crystal structures and electronic properties of charge-transfer salts of tetracyanoquinodimethane with 4,4'-biimidazolium having multiprotonated States

[structure: see text] Novel hydrogen-bonded charge-transfer salts of TCNQ with mono- and diprotonated 4,4'-biimidazolium were synthesized in order to demonstrate the high potential of the 4,4'-biimidazole system in a molecular conductor from the viewpoint of crystal engineering and electronic modulation. Crystal structure analyses of neutral 4,4'-biimidazole and TCNQ salts revealed the formation of two types of hydrogen-bonding modes of the 4,4'-biimidazole moiety depending on the protonated states. Neutral 4,4'-biimidazole possessed a linear chain mode of hydrogen-bonding to construct two-dimensional network. In the TCNQ salt of monoprotonated 4,4'-biimidazolium, the 4,4'-biimidazole moiety formed a dimer by a complementary mode of hydrogen-bonding. In contrast, the salt of diprotonated 4,4'-biimidazolium showed a double linear chain mode of hydrogen-bonding to construct a three-dimensional network. The formation of two types of hydrogen-bonding modes made the difference in the stacking patterns of TCNQ columns and in their transport properties. The TCNQ salt of diprotonated 4,4'-biimidazolium exhibited high electrical conductivity (sigma(rt) = 1.1 x 10(-1) S cm(-1)).     

Thermodynamically stable vesicle formation from glycolipid biosurfactant sponge phase

Thermodynamically stable vesicle (L(alpha1)) formation from glycolipid biosurfactant sponge phase (L(3)) and its mechanism were investigated using a "natural" biocompatible mannosyl-erythritol lipid-A (MEL-A)/L-alpha-dilauroylphosphatidylcholine (DLPC) mixture by varying the composition. The trapping efficiency for calcein and turbidity measurements clearly indicated the existence of three regions: while the trapping efficiencies of the mixed MEL-A/DLPC assemblies at the compositions with X(DLPC)< or =0.1 or X(DLPC)> or =0.8 were almost zero, the mixed assemblies at the compositions with 0.1 or =0.8 were multilamellar vesicles (L(alpha)) with diameter from 2 to 10 microm. Meanwhile, dynamic light scattering (DLS) measurement revealed that the average size of the vesicles at the composition of X(DLPC)=0.3 was 633.2 nm, which is remarkably small compared to other compositions. Moreover, the mixed vesicle solution at the composition of X(DLPC)=0.3 was slightly bluish and turbid and kept its dispersion stability at 25 degrees C for more than 3 months, indicating the formation of a thermodynamically stable vesicle (L(alpha1)). These results exhibited the formation of a thermodynamically stable vesicle (L(alpha1)) with a high dispersibility from the MEL-A/DLPC mixture. The asymmetric distribution of MEL-A and DLPC in the two vesicle monolayers caused by the difference in geometrical structures is very likely to have changed their self-assembled structure from a sponge phase (L(3)) to a thermodynamically stable vesicle (L(alpha1)).     

The synthesis of 1H-benzimidazole derivatives containing a 9H-xanthene or 9H-thioxanthene ring

2-(9H-Xanthen-9-ylmethyl)-1H-benzimidazole ( 2a ) was prepared by condensing 9H-xanthene-9-acetic acid ( 1a ) with 1,2-benzenediamine. Similarly, 2-(9H-thioxanthen-9-ylmethyl)-1H-benzimidazole ( 2b ) and its S,S-dioxide ( 2d ) were obtained. Compound 2d was also prepared by oxidizing 2b with hydrogen peroxide in acetic acid. Heating of 9H-thioxanthene-9-acetic acid 10-oxide ( 1c ) with 1,2-benzenediamine gave 9-methylene-9H-thioxanthene ( 3 ). 2-(9H-Thioxanthen-9-ylmethyl)-1H-benzimidazole S-oxide ( 2c ) was obtained by oxidizing 2b with m-chloroperbenzoic acid in acetone.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.